![]() Would you please post some more photo of your wiring connection from the car H4 to the Ballasts to the headlight please? Uuuhhh, I don't really have anything, and I'm not using the morimoto harness. Then before the buytl cools, I put all the screws back in along the edge, holding it in place. I, as soon as it comes out of the oven, to force the lens into the housing as tight as I can. I find it easier to simply put it together by hand. any idea what would be a good option? I've stopped using those clamps. I will look for some vise like 10 of them to seal the headlight after the retrofit. As for levelness, a small square and by eye. What do I need to trim the headlight housing H$ adapter, to make it straight? I used a dremel and die grinder. ![]() What tools do I need to easily remove the plastic pins to get to the headlight? I generally use my knife, but a small flat head works Just a little extra protection for the connector coming apart and corrosion. However in my particular wire harness I use both H4 connectors (more on that in a bit)ĭo I need to seal the connection between morimoto connection and the cars H4 connection? I wrap the seam tightly in electrical tape. What did you do with the unused H4 connection from the car that is left unused? how did you seal it? It already has grease in the OEM connector to protect from corrosion, so I tightly sealed it with electrical tape. I saw your post seenyp at about ballast placement. The wiring looks a bit more involved that I thought but not that bad. huh look at that line on the wall nice:laugh::nerd: :grin: I feel like I am maturing up lol I was driving my Prius that comes with stock HID and appreciating it for the first time after 5 years. Would the Square lens and shroud look weird on a HL? Which Shroud looks good and fits easily in 08 Highlander assembly I was thinking of the Ocular, Would the H1 fit easier, you mentioned that D2S has a tab that needs to be adjusted to fit at the right angle in our headlight can you please post some pics of that and why you chose to glue it in in this installation. ![]() Sweeneyp I just looked back again at your headlight thread and I am understanding it more and more now. Anyhow I started to read more and more about retrofitting and I think I can get it done myself.īased on what I gather the Japanese car lens comes off easily after 7 min in oven at 265F.Ĭonsidering we have H4 headlight those should be easy installation ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |